The development of science and technology makes the detection of precision stamping so easy

In the early days of factories, manual inspection was used to detect the appearance and dimensional quality of products. Manual use of the eyes for a long time, the eyes are very easy to cause fatigue, resulting in low efficiency and increased product failure rate. With the development of science and technology, machine inspection came into being. Machine vision inspection equipment appearance automated inspection is mainly suitable for precision stamping parts, electronic components, ceramic parts, rubber silicone, screw nuts, mobile phone parts, automotive fasteners, aviation fasteners and other products. Not only can the cost of labor be reduced, but also the efficiency can be improved. Advantages of machine vision inspection equipment in precision stamping processing inspection oil a few points:

1. It can detect the distance between any circles.

2. It can detect the distance between the edges of any part.

3. It can detect the center distance, distance and distance from any edge to the center of the circle.

4. Check whether the precision stamping parts are tilted, missing or poorly sized.

5. Simultaneously implement detection, and the results can be output through COM, I/O, Internet, and other methods.

6. Detection images can be stored and queried.

7. Automatic statistics (good products, defective products, total number, etc.).

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click: www.sjt-ic.com,