What aspects should be attention to in the design of metal stamping parts processing factories

Procedus partibus automotionis in fabricatione fabricationis metallis general is est: stamping - cleaning - welding - degreasing - cleaning - electrophoresis, etc.

1. When designing the structural shape of automotive parts, it is best for Metal Stamping factories to adopt a simple and reasonable structure, and to minimize the number of machined surfaces and the machining area as much as possible;

2. The materials used in automotive hardware stamping parts not only meet the technical requirements of product design, but also the stamping process requirements in the stamping processing plant, as well as the processing requirements of cutting, electroplating, cleaning and other processes after stamping;

3. The requirements for the forming of the performance of automotive stamping in metal stamping parts processing plants. Regarding the forming process, in order to facilitate stamping deformation and improve the quality of the parts, the material should have good plasticity, a large directional coefficient of plate thickness, a small directional coefficient of plate plane, and a small ratio of yield strength to elastic modulus of the material. Concerni separationem non est necessarium habere bonam plasticitatem, sed melior est plasticitatem materiae, minus probabilitatem separare.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,