Why do metal stamping parts experience tearing and other phenomena

Estne ergo causa errorum aut paucam qualitatem materiae procedentium factorium phenomena, sicut lacrimandum et tiltingum partes stampionis metallorum. Cur partibus stampionis metallorum tales phenomena exhibit? Quomodo corrigere et melior?

Based on the actual situation on the site, after examining the tear location, fracture shape, and degree of compression damage of the parts, it is believed that the tearing and tilting behavior of the Metal Stamping parts is mainly reflected in the flanging forming process.metallus cum diagona machinae descendit ut formatur. But now, due to the unstable quality of the pressed parts, it is explained that the machine pressure is in an unbalanced state of pressure fluctuation during the production process.

2. Disadvantages of flanging forming mold planning: the mold is common to the left/right parts of the first mock examination and two cavities. Because this process contains not only flanging, but also shape forming content. In addition, the parts are particularly complex, the bending surface is narrow, and the forming requirements are that the concave die pressing core is consistent with the forming surface, resulting in large forming stroke and small pressing area of the mold structural conditions. Cum plantaverint molam, planatores solum consideraverunt characteristicam parvulae superficie pressionis, sed ignoraverunt pulserum pulseris cordis formantis.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click: www.sjt-ic.com，