Basic maintenance methods for CNC machining centers

The application range of CNC Machining centers is very wide, and it is also a commonly used equipment in the field of precision machining. When using machining centers, whether before, during or after use, corresponding maintenance matters cannot be ignored. Hongweisheng Precision Technology has been engaged in CNC external processing for 17 years. Today, we will share with you the maintenance knowledge about CNC machining centers.

1. Before operating the machining center, wear all personal protective equipment, lubricate and maintain as required, and check the oil level of each lubricant.

2. Cum clampserint opus, tenentes sunt, ut non perveniant collisionem et contritionem opus. When the workpiece in the machining center is heavy, the bearing capacity of the machine tool worktable should also be verified, and the machining center should not be overloaded.

3. Programma machinationis ad accuracionem antequam exercitur verificabitur. Ut faciem velocitatis exercitus centri machinationis, necessaria est confortare similitudinem instrumentorum concussionis.

4. After starting the machining center machine, check whether the movement of the spindle and worktable in all directions is normal, and whether there are any abnormal noises.

5. Durum procedentibus machinatorium attention ad movendum et statum machinatorium omnibus temporibus ut certem quod omnes phenomena abnormale occurrant. When there is noise and alarm, the machine should be stopped immediately for inspection and processing. The machining center can only continue after troubleshooting.

Bona conservationis et inspectiones periodicas non solum vitam servitutis instrumenti machinae, sed etiam bonam machinae accuracionem servabimus. Pro hoc, instrumentum machinae iuxta usum conservabimus et sustinebimus, ut partes altas precisiis facile manebimus.