Principum et introductionem laser cutationis

Exalta energia densitate laser trabem ut calefaceret laborem velociter temperaturam crescit, coquens punctum materiae in brevi tempore attinget, et materia vaporizat, vaporizat. Velocitate eiectionis vaporis istis altissima est, et simul cum vaporis eiecti sunt, incisiones in materia formantur. With the continuous development of the storage tank industry, more and more industries and enterprises are using laser cutting (3 sheets) for storage tanks. More and more enterprises are entering the storage tank industry. However, due to the reduction of the cost of subsequent process processing, it is still feasible to use this equipment in large-scale production.

brief introduction

Laser cutting equipment can cut stainless steel below 4mm, and adding oxygen to the laser beam can cut carbon steel with a thickness of 20mm. However, after oxygen cutting, a thin oxide film will form on the cutting surface. The cutting thickness can be increased to 20mm, but the size of the cutting parts is relatively large.

Prius laserorum equipationum cutationis valde carum est, circa 1,5 miliona iuana aut plus. However, a reduced cost of subsequent processing, it is still feasible to use this equipment in large scale production. Due lack of cutting tool processing costs, laser cutting equipment is also suitable for producing small batches of various sizes of parts that could not be processed before. Laser cutting equipment usually uses computerized numerical control technology (CNC) devices, which can be used to receive cutting data from computer-aided design (CAD) workstations via telephone lines.

principe

Laser cutting is the use of a focused high-power density laser beam to irradiate a work piece, causing the irradiated material to rapidly melt, vaporize, burn, or reach the ignition point. At the same time, high-speed airflow coaxial with the beam is used to blow away the molten material, thereby aching the cutting of the work piece. Laser cutting is one of the thermal cutting methods. Exactly!