EMAR tells how precision metal processing manufacturers can solve the problem of uneven hardware surfaces.

1. Inspection and maintenance of sheet metal cleaning equipment: The metal press needs to be inspected and maintained before metal processing production to make its cleaning more effective, paying attention to the quality of roller joints and cleaning oil. tI1 Hardware Factory, Hardware Products, Metal Products, Precision Sheet Metal, Hardware Processing, Sheet Metal Factory, Metal Stamping, Hardware Stamping, CNC

2. Appropriate hand rate: Carry out material testing on the manufactured parts before manufacturing. Reasonably set the manipulator speed and material viewing angle to prevent contact with the manufactured parts and the lower mold, and prevent semi-automatic stretching production. When the pull needle is at the lower mold site, the robot hand speed is faster, and the burr will fall on the punch head, causing uneven metal indentation. 3. Hardware processing inspection and correction of cutting methods: observe before pressing to avoid uneven iron powder. Iron powder generated during the cutting process can also cause uneven metal stamping parts after cutting. 4. Check the cut-off surface: Damage in the cut-off mode will cause a large number of fine iron powder to stick to the front, so the cross-sectional area of the double material or the burr cleaning plate must be checked according to the production line metal. 5. Inspection and calibration of extension dies: In order to reduce the generation of uneven metal indentation, the extension die should be inspected and maintained regularly to maintain stability. The usual manufacturing method is to sample the side rings and processing surfaces (die corners) to check whether there are adhesive scratches on the convex corners. This information is supplied by EMAR hardware manufacturers, more hardware factories, hardware products, metal products, precision sheet metal, hardware processing, sheet metal factories, metal stamping processing, metal stamping processing, metal processing, CNC lathe processing and other information. We warmly welcome people from all walks of life to visit our factory to negotiate and guide. We will serve you wholeheartedly.