Let's talk about the debugging of stamping molds in stamping factories

After the installation of the stamping die, a comprehensive inspection and examination of the quality of the stamping part and the performance of the die should be carried out. Regarding the problems that occur during the trial stamping stage, a comprehensive analysis should be conducted to identify the causes of the problems, and appropriate adjustments and corrections should be made to the stamping die to ultimately achieve qualified stamping products.

So what is the intention of trial punching and adjustment of stamping parts molds?

1. Determine the quality of stamped parts and molds; Confirm the forming conditions of the stamped parts;

3. Confirm the blank shape, dimensions, and material specifications of the formed parts and products;

In the production of stamping dies, it is difficult to accurately calculate the size and shape of the blank before deformation during planning for some stamping parts with complex shapes or high precision requirements, such as bending, deep drawing, forming, cold extrusion, etc. In order to obtain more accurate blank shape, scale, and material specifications, it is only necessary to repeatedly adjust the mold to produce qualified parts before confirmation.

4. Regarding some process scales that are difficult to confirm using calculation methods in mold planning and process planning, such as the complex convex and concave die corners of deep drawing dies, or the geometric shapes and scales of certain parts of the mold, it is necessary to conduct trial punching and adjustment at the same time until qualified parts are punched out, and the shapes and scales of these parts can be finally confirmed.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,