What kind of treatment do metal stamping factories usually do on the surface of stamped parts

After processing Metal Stamping parts, metal stamping factories generally perform surface treatment to prevent oxidation and other conditions from occurring within a certain period of time. The appearance of metal stamping parts is generally treated as follows:

1. Surface polishing processing: Surface polishing processing is generally used in daily necessities. After deburring the surface of metal stamping products, for example, some metal stamping parts have sharp edges and corners. For this type of stamping part, we usually polish it to make the sharp edges and corners smooth; 2. Spray painting processing: Generally, metal stamping factories use spray painting processing when producing large hardware products. After spray painting processing, hardware parts are used to prevent rusting, such as daily necessities and electrical casings;

3. Electroplating: Electroplating is also the most widely used processing technology for metal stamping parts. After electroplating the surface of the metal stamping parts, it can ensure that the products will not mold or rust during long-term use. Electroplating is generally used for screws, metal stamping parts, battery cells, car parts, etc.

After a certain surface treatment, it is possible to avoid oxidation problems on the surface of stamped parts in certain wet weather conditions such as rain. This is a win-win situation for both customers and hardware stamping factories.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,