Deeply understand the reasons for the unsmooth feeding of molds during stamping processing

Hardware stamping parts processing factory, processing various Metal Stamping parts, stainless steel stamping parts, irregular parts, etc. Sometimes, when feeding molds during stamping parts processing, it is not smooth. What is the reason for this? Let's take a look below.

The reasons for the unsmooth feeding are:

1. The mold may not be properly aligned, resulting in the material strip, feeder, and mold not being in the same straight line;

2. Uneven material strip;

3. The mold does not unload, resulting in poor feeding;

4. Positioning too tight; 5. The guide pin is too tight or the straight wall position is too long;

6. Poor or too long fixation of the punch and dryness of the material strip;

7. The top material pin is too short, and the material strip and formed block are dry;

8. Improper positioning of floating blocks;

9. Insufficient avoidance can cause interference.

These reasons can all lead to poor feeding of the mold, so it is important to regularly inspect and maintain the mold.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,